Fictron Industrial Supplies Sdn Bhd
5-6, Jalan USJ 9/5Q,
Subang Business Centre,
47620 UEP Subang Jaya,
Selangor, Malaysia.


Selangor Office:
36, Jalan Puteri 5/12,
Bandar Puteri,
47100 Puchong,

Penang Office:
44A Jalan Besi,
11600 Green Lane,
Penang, Malaysia.

Production Platform Safety: 4 Applications That Require Custom Solutions

Production Platform Safety: 4 Applications That Require Custom Solutions
View Full Size
Manufacturing facilities, particularly those that have production platforms with mixers for foods, often need to use every bit of available space for the various applications performed in the facility. Employees often work in these applications, so safety devices are a must, especially when the employees are working from height.
Chemical and food production factories are often filled up with production platforms. Many of these plants have heavy reactors or grinders with hoppers accessed by elevated platforms positioned near the top of the vessels. Commonly a lift truck loads pallets of ingredients onto these upper levels for employees to load into these mixers. Employees, commonly located near a ledge, must remove heavy bags from the pallet, slice them open and pour them into the large mixer.
The mixer is generally located near the pallet drop area to minimize the distance the employee has to travel with the heavy bag. A series of catwalks and small mezzanines around the mixer and the production machinery often complete the area. This short space leaves very little room for employee, product, and the proper fall protection guarding, that could expose employees to a high risk for incidents like falls.
While this application is fairly common, every single manufacturing facility has its own unique space constraints. In spite of the constraints, all pallet drop areas on elevated platforms should be properly safeguarded for fall protection, but areas on production platforms where employees are asked to work around the ledge, often in a hostile environment, need to be taken seriously. This is often tiring, repetitive work in a dusty or wet environment so companies must take safety out of employee’s hands, and give them one less thing to think about during the day.
Caused by the nature of applications that are typical of chemical or food manufacturing, protecting the areas on which employees work can be hard. That could be why fall protection safety is sometimes left to a piece of chain, which is not enough to keep employees safe or meet OSHA codes and ANSI standards. It's not a type of situation where you can disregard safety and at the same time, most standard solutions will not be the right fit, may pose hazards.
Here are four examples of applications in chemical and food manufacturing in which custom solutions are most often required to ensure that employees have adequate fall protection.
No Room on the Platform
As a result of the complexity of the the applications in the areas that needed to be secured in most processing facilities, there is usually little room on the platform to accommodate a security barrier. In such instances, custom designed safety gates are needed as they often need to be worked into the existing framework of the platform. As an example, a custom-built safety gate may affix to the handrail instead of the walkway floor to provide dual-gate protection while taking up a minimum amount of space.
Rotating Pallets
When a pallet drop area includes a turntable that rotates 360 degrees, there are commonly added challenges that make custom safety solutions a necessary choice. There might be hindrances such as low overhead, the traffic patterns of lift trucks and how the trucks enter the platform, or there may be infractions from a ramp or mixer that impact how a safety gate could be used. Custom safety gate designs should accommodate the pallets and drop area requirements; they have to also ensure the applications and processes are not impacted while providing a safe work environment.
Blending Hoppers
Blending hoppers are usually placed close to a ledge so the employee can simply pick up the sack from the pallet, turn and dump the bag of ingredients into the hopper without carrying the bag. In such cases, there is normally limited depth which doesn't provide adequate room for a traditional dual-gate safety system. Safety gate systems that use gates that have rear-side gates that raise up and out of the way to allow access to the pallet while the ledge gate is closed are needed here. With this type of custom system in place, a worker can seize the bag around the pallet and drop it freely into the hopper while a barrier is in place at the ledge to restrict a fall.
Overhead Hoists and Vacuums
Many processing plants use overhead hoists to load and unload materials. In some operations, overhead hoists lift materials up to an elevated work platform instead of using a lift truck. That is the traditional method of lifting super sacks up to the processing platform where they may be dumped into hoppers. Other facilities might use a lift truck to elevate the material up to the platform, but then will use an overhead hoist to access the material once they are ready to work with the material. This is a common method of removing drums of ingredients off of a pallet. Custom safety gates with no overhead components that would integrate with the overhead equipment are required in this case. The custom solutions can provide interconnected gates that close on one side while opening the other, preventing employee falls.
This article is originally posted on